Equipment & Capabilities
35+ PRESSES.
40 TO 1000 TONS.
Tool build, molding, secondary ops, and validation under one roof — in Pittsfield, MA and Ormond Beach, FL. Both plants run a Class 8 cleanroom. Every press, tonnage, and shot size is listed below.
35+
Injection Presses
40–1000 T
Clamp Range
23 oz
Max Shot Size
2 Sites
MA + FL
01 · Machine Inventory
Every machine on the floor.
The full inventory — presses, CNC centers, EDM, metrology, and automation. Search by name, make, or model, filter by tonnage and capability, and switch between cards and a spec table. Every machine is on a scheduled PM cycle and tied into our quality system.
117 machines
| Category | Model | Status | |||
|---|---|---|---|---|---|
| 7.5-Ton Chiller | Auxiliary Equipment | — | — | 1 | Available |
| 75-Ton Water Tower | Auxiliary Equipment | — | — | 1 | Available |
| Acer AGS-1020AHD Surface Grinder | Tooling | Acer | AGS-1020AHD | 1 | Available |
| Advantage 3-Ton Chiller | Auxiliary Equipment | Advantage | — | 1 | Available |
| Arburg Vertical Allrounder 28 Ton | Injection Presses | Arburg | — | 1 | Available |
| Battenfeld 15 Ton | Injection Presses | Battenfeld | — | 1 | Available |
| Battenfeld 40 Ton | Injection Presses | Battenfeld | — | 1 | Available |
| Bench Drill Presses (0.5")×2 | Tooling | — | — | 2 | Available |
| Branson Ultrasonic Welders×2 | Other Equipment | Branson | — | 2 | Available |
| Bridgeport BR2J Mills×3 | Tooling | Bridgeport | BR2J | 3 | Available |
| Bridgeport Romi CNC Lathe | CNC Machines | Bridgeport | — | 1 | Available |
| Bridgeport Series II SE2J6F Mill | Tooling | Bridgeport | Series II SE2J6F | 1 | Available |
| Bridgeport Surface Grinder (8×15×12) | Tooling | Bridgeport | — | 1 | Available |
| Bridgeport Torq-Cut 22 (CNC)×2 | CNC Machines | Bridgeport | Torq-Cut 22 | 2 | Available |
| Brown & Sharpe Micromaster Surface Grinder | Tooling | Brown & Sharpe | — | 1 | Available |
| Brown & Sharpe Micromaster Surface Grinder (Dedtru) | Tooling | Brown & Sharpe | — | 1 | Available |
| Brown & Sharpe No. 13 Cylindrical Grinder | Tooling | Brown & Sharpe | No. 13 | 1 | Available |
| CADRA 2-D / SOLIDWORKS 3-D (2 seats)×2 | Other Equipment | — | — | 2 | Available |
| Charmilles RoboForm 350 Sinker EDM×2 | EDM | Charmilles | RoboForm 350 | 2 | Available |
| Cincinnati 55 Ton Toggle | Injection Presses | Cincinnati | — | 1 | Available |
| Clark 2.5-Ton Forklift | Other Equipment | Clark | — | 1 | Available |
| Conair Concentrate Mixers×4 | Auxiliary Equipment | Conair | — | 4 | Available |
| Conair Martin Sprue-Puller Robots×9 | Robotics & Automation | Conair | — | 9 | Available |
| Conveyor Systems×5 | Auxiliary Equipment | — | — | 5 | Available |
| Covel No. 512H Cylindrical Grinder | Tooling | Covel | No. 512H | 1 | Available |
| Covel Surface Grinder (10×15×12.5) | Tooling | Covel | — | 1 | Available |
| Covel Surface Grinder (6×18×14) | Tooling | Covel | — | 1 | Available |
| D-M-E Hot-Runner Controllers×4 | Auxiliary Equipment | D-M-E | — | 4 | Available |
| Deckel GK21 Pantograph | Tooling | Deckel | GK21 | 1 | Available |
| Drake 50-Ton Arbor Press | Tooling | Drake | — | 1 | Available |
| Dri-Air H-35/30 PDII Dryer | Auxiliary Equipment | Dri-Air | H-35/30 PDII | 1 | Available |
| Drying Oven | Auxiliary Equipment | — | — | 1 | Available |
| Fadal VMC 20 (CNC) | CNC Machines | Fadal | VMC 20 | 1 | Available |
| Fadal VMC 4020 (CNC)×3 | CNC Machines | Fadal | VMC 4020 | 3 | Available |
| Fast Heat Hot-Runner Controllers×2 | Auxiliary Equipment | Fast Heat | — | 2 | Available |
| Gesswein Argofile Polishers×3 | Tooling | Gesswein | Argofile | 3 | Available |
| Gesswein Ultramax DF Polisher | Tooling | Gesswein | Ultramax DF | 1 | Available |
| Gesswein Ultramax SF Polishers×2 | Tooling | Gesswein | Ultramax SF | 2 | Available |
| Gorton 16A Mill (Duplicating Table) | Tooling | Gorton | 16A | 1 | Available |
| Gorton 8.5D Mill (Duplicating Table) | Tooling | Gorton | 8.5D | 1 | Available |
| Gorton 8D Mill (Duplicating Table) | Tooling | Gorton | 8D | 1 | Available |
| Grob 8×18 Band Saw | Tooling | Grob | — | 1 | Available |
| Haas VF-3 (CNC) | CNC Machines | Haas | VF-3 | 1 | Available |
| Hardinge Lathe | Tooling | Hardinge | — | 1 | Available |
| Heat-Treating Oven | Tooling | — | — | 1 | Available |
| Hopper Loaders×6 | Auxiliary Equipment | — | — | 6 | Available |
| Hot Oil Heater | Auxiliary Equipment | — | — | 1 | Available |
| Hot-Stamp Machine | Other Equipment | — | — | 1 | Available |
| Imtran Pad Printers×2 | Other Equipment | Imtran | — | 2 | Available |
| Incoe Hot-Runner Controllers×2 | Auxiliary Equipment | Incoe | — | 2 | Available |
| Ingersoll Rand Air Compressors (Molding)×2 | Auxiliary Equipment | Ingersoll Rand | — | 2 | Available |
| Ingersoll Rand Air Compressors (Tool Room)×2 | Auxiliary Equipment | Ingersoll Rand | — | 2 | Available |
| Ingersoll Rand Rotary-Screw Air Compressors×2 | Auxiliary Equipment | Ingersoll Rand | — | 2 | Available |
| K&I Cut-Off Saw | Tooling | K&I | — | 1 | Available |
| Kalamazoo 10×15 Saw | Tooling | Kalamazoo | — | 1 | Available |
| Makino EDAC2000S Small-Hole EDM | EDM | Makino | ED a 2000S | 1 | Available |
| Material Granulators×8 | Auxiliary Equipment | — | — | 8 | Available |
| Misawa B/C Hardness Tester | Quality & Inspection | Misawa | — | 1 | Available |
| Mitsubishi FA20 Wire EDM | EDM | Mitsubishi | FA20 | 1 | Available |
| Mitsubishi M35K CNC Sinker EDM×2 | EDM | Mitsubishi | M35K | 2 | Available |
| Mitsui Surface Grinders (8×18×16)×2 | Tooling | Mitsui | — | 2 | Available |
| Mokon 2-Ton Chiller | Auxiliary Equipment | Mokon | — | 1 | Available |
| Mold-Heating Thermolators×12 | Auxiliary Equipment | — | — | 12 | Available |
| Monarch Lathes×2 | Tooling | Monarch | — | 2 | Available |
| Moore G18 Jig Grinder | Tooling | Moore | G18 | 1 | Available |
| Niigata 110 Ton Toggle (5.4 oz) | Injection Presses | Niigata | — | 1 | Available |
| Niigata 110 Ton Toggle (6.3 oz) | Injection Presses | Niigata | — | 1 | Available |
| Niigata 85 Ton Toggle×2 | Injection Presses | Niigata | — | 2 | Available |
| Nikon Optical Comparator | Quality & Inspection | Nikon | — | 1 | Available |
| Nissei 120 Ton Hydraulic | Injection Presses | Nissei | — | 1 | Available |
| Nissei 140 Ton Hybrid (11.9 oz) | Injection Presses | Nissei | — | 1 | Available |
| Nissei 140 Ton Hybrid (8.6 oz) | Injection Presses | Nissei | — | 1 | Available |
| Nissei 154 Ton Hybrid | Injection Presses | Nissei | — | 1 | Available |
| Nissei 300 Ton Hydraulic×4 | Injection Presses | Nissei | — | 4 | Available |
| Nissei 44 Ton Hybrid | Injection Presses | Nissei | — | 1 | Available |
| Nissei 55 Ton Hybrid | Injection Presses | Nissei | — | 1 | Available |
| Nissei 60 Ton Hybrid | Injection Presses | Nissei | — | 1 | Available |
| Nissei 65 Ton Hybrid×2 | Injection Presses | Nissei | — | 2 | Available |
| Nissei 80 Ton Hybrid×3 | Injection Presses | Nissei | — | 3 | Available |
| Nissei 80 Ton Hydraulic | Injection Presses | Nissei | — | 1 | Available |
| Nissei 88 Ton Electric | Injection Presses | Nissei | — | 1 | Available |
| Nissei 89 Ton Hybrid | Injection Presses | Nissei | — | 1 | Available |
| Nissui Drying & Loading System | Auxiliary Equipment | Nissui | — | 1 | Available |
| Novatec Hopper Dryers×7 | Auxiliary Equipment | Novatec | — | 7 | Available |
| OGP SmartScope 200 | Quality & Inspection | OGP | SmartScope 200 | 1 | Available |
| Okamoto ACC8-20ST Surface Grinders×2 | Tooling | Okamoto | ACC8-20ST | 2 | Available |
| Okamoto Surface Grinder (12×24×10.5) | Tooling | Okamoto | — | 1 | Available |
| Overhead Rail Cranes×5 | Auxiliary Equipment | — | — | 5 | Available |
| Pratt & Whitney Cutter Grinder | Tooling | Pratt & Whitney | — | 1 | Available |
| Reid Surface Grinder (6×18×9) | Tooling | Reid | — | 1 | Available |
| Ruemelin Vapor Blast | Tooling | Ruemelin | — | 1 | Available |
| Siemens NX I-DEAS 3-D (1 seat) | Other Equipment | Siemens | — | 1 | Available |
| South Bend Lathe | Tooling | South Bend | — | 1 | Available |
| SQC-Pack Quality-Control Software | Quality & Inspection | — | — | 1 | Available |
| Star Sprue Pickers×2 | Robotics & Automation | Star | — | 2 | Available |
| Sunnen MRB-1600 Hone | Tooling | Sunnen | MRB-1600 | 1 | Available |
| Tempering Oven | Tooling | — | — | 1 | Available |
| Thompson Surface Grinder (12×24×9) | Tooling | Thompson | — | 1 | Available |
| Thompson Surface Grinder (18×72×16) | Tooling | Thompson | — | 1 | Available |
| Tool Grinders (0.5" × 6")×4 | Tooling | — | — | 4 | Available |
| Top-One TOM-3VHG (CNC) | CNC Machines | Top-One | TOM-3VHG | 1 | Available |
| Tos Trencin Lathe | Tooling | Tos | — | 1 | Available |
| Trinco Glass-Bead Dry Blast | Tooling | Trinco | — | 1 | Available |
| Tru-Tech TTS-8-20 CNC Grinder | Tooling | Tru-Tech | TTS-8-20 | 1 | Available |
| Ultrasonic Heat Inserter | Auxiliary Equipment | — | — | 1 | Available |
| Van Norman No. 26 Mill | Tooling | Van Norman | No. 26 | 1 | Available |
| Vermont Automatic Pad-Print Machine | Other Equipment | Vermont | — | 1 | Available |
| Vibra Free High-Speed Hard-Milling Centers×2 | CNC Machines | Vibra Free | — | 2 | Available |
| Westhoff Carbon Drilling Machine | Tooling | Westhoff | — | 1 | Available |
| Willis-Bergo 1.5" Radial Drill | Tooling | Willis-Bergo | — | 1 | Available |
| Wittmann High-Heat Mold Thermolator | Auxiliary Equipment | Wittmann | — | 1 | Available |
| Wittmann Hopper Dryer | Auxiliary Equipment | Wittmann | — | 1 | Available |
| Yushin Hop Five 450 Pick-and-Place Robot | Robotics & Automation | Yushin | Hop Five 450 | 1 | Available |
| Yushin Hop Five 550 Pick-and-Place Robot | Robotics & Automation | Yushin | Hop Five 550 | 1 | Available |
| Yushin Hop Five 650 Pick-and-Place Robots×2 | Robotics & Automation | Yushin | Hop Five 650 | 2 | Available |
| Yushin Sprue-Picker Robots×2 | Robotics & Automation | Yushin | — | 2 | Available |
| Yushin YKM-300-S-2 Pick-and-Place Robots×4 | Robotics & Automation | Yushin | YKM-300-S-2 | 4 | Available |
Browse every machine
Every machine on our floor, grouped by category — open any one for its full specs.
Injection Presses
- Nissei 300 Ton Hydraulic
- Nissei 154 Ton Hybrid
- Nissei 140 Ton Hybrid (8.6 oz)
- Nissei 140 Ton Hybrid (11.9 oz)
- Nissei 120 Ton Hydraulic
- Niigata 110 Ton Toggle (6.3 oz)
- Niigata 110 Ton Toggle (5.4 oz)
- Nissei 89 Ton Hybrid
- Nissei 80 Ton Hybrid
- Nissei 88 Ton Electric
- Niigata 85 Ton Toggle
- Nissei 80 Ton Hydraulic
- Nissei 65 Ton Hybrid
- Nissei 60 Ton Hybrid
- Nissei 55 Ton Hybrid
- Cincinnati 55 Ton Toggle
- Nissei 44 Ton Hybrid
- Battenfeld 40 Ton
- Battenfeld 15 Ton
- Arburg Vertical Allrounder 28 Ton
CNC Machines
EDM
Quality & Inspection
Tooling
- Bridgeport BR2J Mills
- Bridgeport Series II SE2J6F Mill
- Gorton 16A Mill (Duplicating Table)
- Gorton 8.5D Mill (Duplicating Table)
- Gorton 8D Mill (Duplicating Table)
- Van Norman No. 26 Mill
- Deckel GK21 Pantograph
- Okamoto ACC8-20ST Surface Grinders
- Thompson Surface Grinder (18×72×16)
- Thompson Surface Grinder (12×24×9)
- Okamoto Surface Grinder (12×24×10.5)
- Reid Surface Grinder (6×18×9)
- Covel Surface Grinder (10×15×12.5)
- Covel Surface Grinder (6×18×14)
- Bridgeport Surface Grinder (8×15×12)
- Brown & Sharpe Micromaster Surface Grinder
- Brown & Sharpe Micromaster Surface Grinder (Dedtru)
- Mitsui Surface Grinders (8×18×16)
- Acer AGS-1020AHD Surface Grinder
- Brown & Sharpe No. 13 Cylindrical Grinder
- Covel No. 512H Cylindrical Grinder
- Tru-Tech TTS-8-20 CNC Grinder
- Moore G18 Jig Grinder
- Tos Trencin Lathe
- Monarch Lathes
- South Bend Lathe
- Hardinge Lathe
- Sunnen MRB-1600 Hone
- Gesswein Ultramax SF Polishers
- Gesswein Ultramax DF Polisher
- Gesswein Argofile Polishers
- Willis-Bergo 1.5" Radial Drill
- Bench Drill Presses (0.5")
- Westhoff Carbon Drilling Machine
- Grob 8×18 Band Saw
- Kalamazoo 10×15 Saw
- K&I Cut-Off Saw
- Heat-Treating Oven
- Tempering Oven
- Ruemelin Vapor Blast
- Trinco Glass-Bead Dry Blast
- Drake 50-Ton Arbor Press
- Pratt & Whitney Cutter Grinder
- Tool Grinders (0.5" × 6")
Auxiliary Equipment
- Mold-Heating Thermolators
- Wittmann High-Heat Mold Thermolator
- Incoe Hot-Runner Controllers
- D-M-E Hot-Runner Controllers
- Fast Heat Hot-Runner Controllers
- Hot Oil Heater
- Conveyor Systems
- Material Granulators
- Advantage 3-Ton Chiller
- Mokon 2-Ton Chiller
- 7.5-Ton Chiller
- 75-Ton Water Tower
- Conair Concentrate Mixers
- Hopper Loaders
- Novatec Hopper Dryers
- Wittmann Hopper Dryer
- Dri-Air H-35/30 PDII Dryer
- Drying Oven
- Nissui Drying & Loading System
- Ultrasonic Heat Inserter
- Ingersoll Rand Air Compressors (Molding)
- Ingersoll Rand Rotary-Screw Air Compressors
- Ingersoll Rand Air Compressors (Tool Room)
- Overhead Rail Cranes
Robotics & Automation
02 · Tooling
We build the tools we run.
In-house tool shop, on the same floor as the presses. That is the difference between a 30-day fix and a same-week fix.
In-House Tool Build
3-axis and 5-axis CNC, sinker and wire EDM, surface and cylindrical grinding, polishing. Every tool we run can be cut, modified, and maintained without leaving the building.
Mold Engineering
Mastercam, Mold-Flow analysis, hot-runner and cold-runner design, multi-cavity layout, mold-base sourcing from DME, Hasco, and Progressive.
Repair, Transfer & Re-Tool
Welding, re-cutting cavities, vent re-work, ejector overhaul, cooling-line repair. We take in transferred tools and bring them back into qualified production.
03 · Secondary Operations
Finished assemblies, not just parts.
- Automated and manual assembly cells
- Ultrasonic welding and heat staking
- Pad printing and hot stamping
- Insert molding and over-molding
- Kitting, labeling, and packaging
- Decorating, deburring, and finishing
04 · Metrology & Quality
Measured, documented, repeatable.
- Keyence automated vision measurement
- OGP SmartScope systems
- Optical comparators
- 2D vision systems and digital micrometers
- Surface-finish gages (Ra / Rz)
- Full PPAP, FAI, and SPC reporting
05 · Cleanroom Molding · MA + FL
Two ISO Class 8 cleanrooms for medical and life sciences.
A dedicated, monitored Class 8 cleanroom at each plant for medical disposables, fluid-delivery components, and regulated programs. Documentation, validation, and traceability built in from day one.
Class
ISO 8
Location
Pittsfield, MA + Ormond Beach, FL
Validation
IQ / OQ / PQ
Standard
ISO 9001 certified
We build programs, not just parts.
Have a part that needs the right press?
Send your print or STEP file. We will tell you the press, the cycle, and the quote, promptly.